The Black PRO Car is our fastest pinewood derby car. It pushes the Speed Limit! It is track-tested car ready to race featuring our race winning PRO friction-free BSA Ultra-Lite graphite-coated wheels and PRO BSA graphite-coated grooved axles.
How fast do Pinewood Derby cars go mph?
The Speed of Pinewood Derby Cars
The distribution plot below shows a range of speeds from 177 mph to 229 mph, with most cars exceeding 200 mph.
Is a heavier Pinewood Derby car faster?
Much has been written about the physics of pinewood derby cars, and this is one rare case in racing where heavy = fast. Aerodynamics have little effect in such a short race, but weight does and putting the weight at the back of the car will make your car faster on the flat of the track.
Should I bake my pinewood derby car?
Should I bake the pinewood derby block? The short answer is no, do not bake the block. The idea behind baking the block is to remove moisture which will make the block lighter. You can then add more weight to the back of the car.
Do you glue pinewood derby axles?
7. Create Glue Holes: Glue the axles firmly in their holes to ensure that they stay perfectly placed, but make sure you don’t get glue on your wheels. 8. Add Weight: Remember to make your Pinewood Derby car as heavy as the rules allow.
What is the angle of a pinewood derby track?
The track should slope from about 30 degrees at the start line changing gradually to 0 degrees about 12 feet from the start line then the track should run flat to the finish line. The remainder of the track is an overrun area to allow the cars to stop.
What is the best weight for a Pinewood Derby car?
First, the basics: Your car should weigh as much as it’s allowed. In most races, a Pinewood Derby car’s weight is limited to 5 ounces. If your car weighs less than that, add coins or other weights. As far as where you should attach those weights to your car … well, let’s just say opinions differ.
How do you weight a Pinewood Derby car?
Best Location to Weight Your Pinewood Derby Car
When deciding on where to weight your car, you should try to reach a final balance point of the car 1 inch or less in front of the rear axle. To achieve this, place 2/5 of the added weight behind the rear axle, and the remaining 3/5 in front of the rear axle.
How do you make a soap box car go faster?
Weight: Numerous formula-based calculations and real-life experiments have been done to determine if a heavier or slower soap box derby car will go faster. Consensus is that adding weight gives the car more momentum (acceleration/top speed) and cuts down on air resistance/drag.
Are Bent axles legal in Pinewood Derby?
Axles may be bent or inserted to cant the wheels. 4. Axles may be positioned to allow one wheel to NOT touch the track via adjustment, bent axle or placement as long as this DOES NOT violate any other specifications. 5.
Do aerodynamics matter in pinewood derby?
A more aerodynamic car (but very similar for other things) doesn’t give you much bang for your buck. Friction will get you. If you can reduce the coefficient of friction by just a little bit, it will make a noticeable difference. If you let your kids do most of the work, they will gain more than a win.
