With the vehicle off, turn the key to the “on” position, but don’t start the car. Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait 20 minutes for the sensor to refresh. The TPMS reset button is usually located beneath the steering wheel.
How do you reset the tire pressure light on a 2011 Lexus ES 350?
Turn the engine on, then press and hold down the reset button. You’re going to find it low and to the right of the steering wheel on the instrument panel. Keep the button down until the tpms indicator in the instrument panel pulses three times gradually which should indicate the reset feature worked.
What should the tire pressure be on a Lexus ES 350?
What Lexus Recommends. Check the sticker inside your door panel or in your owner’s manual for the recommended pressure. It is 30 pounds per square inch, PSI, for all four tires.
Why TPMS light on but tires are fine?
When air pressure on one or more of your tires falls below 25%, the TPMS light comes on. Before you inflate the tires thinking that the air pressure is incorrect, be sure to check for yourself.
Why is my tire pressure light on?
The purpose of the TPMS (Tire Pressure Monitoring System) is to alert you when tire pressure is too low and could create unsafe driving conditions. If the light is illuminated, it means your tires could be underinflated, which can lead to undue tire wear and possible tire failure.
