Which of the following is used on a wireless network to identify the network name? Wireless devices use the SSID (Service Set Identification) to identify the network name. All devices on a wireless network use the same SSID.
Which of the following is true when the DHCP setting is disabled in a wireless network correct answer?
Which of the following is true when the DHCP setting is disabled in a wireless network? Wireless clients must use a static IP address within the correct IP address range to connect to the network.
What are the characteristics of 802.11 wireless networks?
802.11a Protocol Features
802.11a uses 5GHz frequency band which is less crowded and hence has relatively smaller interference problem.802.11a supports up to 54Mbps of bandwidth, which is much faster than the 11Mbps bandwidth provided by 802.11b standard devices.802.11a offers as many as 12 non-overlapping channels.
Which of the following provides security for wireless networks?
Which of the following provides security for wireless networks? Wi-Fi protected access (WPA).
What type of wireless technology is used for 802.11 b networks?
IEEE 802.11b-1999 or 802.11b is an amendment to the IEEE 802.11 wireless networking specification that extends throughput up to 11 Mbit/s using the same 2.4 GHz band. A related amendment was incorporated into the IEEE 802.11-2007 standard.
What are two characteristics of a 5GHz band wireless network?
– Speed: 5GHz band sends data at faster speeds, with a higher data rate. – Less congestion: 5GHz WiFi frequency experiences fewer interferences from other devices because fewer devices use 5GHz frequency. – Less overcrowding: 5 GHz has more free radio air and channels, i.e., 23 working channels vs.
Which of the following wireless standards allows the use of MIMO?
The first standard to specify MIMO, 802.11n was approved in October 2009 and allows for usage in two frequencies – 2.4GHz and 5GHz, with speeds up to 600Mbps. When you hear wireless LAN vendors use the term “dual-band”, it refers to being able to deliver data across these two frequencies.
How do I enable DHCP for wireless network connection?
To enable DHCP or change other TCP/IP settings
Select Start , then select Settings > Network & Internet .Do one of the following: For a Wi-Fi network, select Wi-Fi > Manage known networks. Under IP assignment, select Edit.Under Edit IP settings, select Automatic (DHCP) or Manual. When you’re done, select Save.
How do I enable DHCP?
Enable DHCP Mode
Make sure your Home Network Security Station is turned ON and connected to your home router.On your Home Network Security App, tap the Menu icon.Tap Settings.Tap Station Configuration.Under STATION NETWORK SETTINGS, select DHCP Mode.
Which feature is characteristic of MAC filtering in wireless networks?
It restricts computer access to a wireless network. Answers Explanation & Hints: MAC address filtering uses the MAC address to identify which devices are allowed to connect to the wireless network.
Which of the following is the most secure security protocol for wireless networks?
WPA2 – Wi-Fi Protected Access 2 (WPA2) is the most secure protocol listed for connecting to wireless networks.
Which of the following provides the strongest encryption in wireless networks?
WPA2-PSK (AES): This is the most secure option. It uses WPA2, the latest Wi-Fi encryption standard, and the latest AES encryption protocol.
Which device enables you to extend the capabilities of a wireless network?
A. A Wireless Access Point (WAP) enables you to extend the capabilities of a wireless network.
What are 802.11 b devices?
Devices using 802.11b experience interference from other products operating in the 2.4 GHz band. Devices operating in the 2.4 GHz range include microwave ovens, Bluetooth devices, baby monitors, cordless telephones, and some amateur radio equipment.
What type of wireless technology is used for 802.11 b networks quizlet?
The 802.11a wireless standard offers maximum speeds of 54 Mbps and uses the 5 Ghz frequency range. The 802.11g wireless standard offers maximum speeds of 54 Mbps. 802.11b uses the 2.4 GHz frequency range but supports only 11 Mbps transfer speeds.
What is 802.11 b only?
The 802.11b Wi-Fi standard provides a wireless range of roughly 35 meters indoors and 140 meters outdoors. It supports transfer rates up to 11 Mbps, or 1.375 megabytes per second. In the late 1990s, this was significantly faster than Internet speeds available to most homes and businesses.
